Concrete & Demolition · Enquiries welcome
Husqvarna 400 mm Electric Brick Saw Hire
Make accurate, repeatable cuts in bricks, blocks and pavers with the Husqvarna TS 400 F electric masonry saw. Features a sliding cutting table, folding stand and water-cooling system.
$150 / 24 hours + blade wear
A standard entry-level Husqvarna VH5 400 mm diamond blade is supplied. There is no separate daily rental fee for this standard blade. All blade wear is charged separately.
Standard blade wear: $20 per mm, including GST. Charged in 0.5 mm increments at $10 per increment, rounded up. No blade wear allowance is included. Blade segment height is measured before and after hire; charges apply to the reduction in segment height. Calculate wear over the full hire period, then round up once on return.
Multiple blade options available
The included Husqvarna VH5 is our standard entry-level diamond blade. Other blades are available to suit different materials and cutting requirements. Please tell us what you intend to cut so we can recommend the appropriate option. Alternative blades may have different rental and/or wear charges. Any additional charges will be quoted and agreed before hire. The advertised $20/mm wear rate applies only to the standard entry-level VH5 blade.
Enquire for blade options and pricing
All amounts include GST. Delivery and collection charged separately. Longer hire periods available by enquiry.
Availability to be confirmed — enquiries welcome. Hire is not confirmed until the saw is ready for hire.
Blade-wear examples · 24hrs hire
| Measured wear | Wear charge | Total with saw hire |
|---|---|---|
| No measurable wear | $0 | $150 |
| Up to 0.5 mm | $10 | $160 |
| Over 0.5 mm and up to 1 mm | $20 | $170 |
| Over 1 mm and up to 1.5 mm | $30 | $180 |
| Over 1.5 mm and up to 2 mm | $40 | $190 |
No measurable wear: no wear charge. All amounts include GST and exclude delivery, cleaning or damage charges.
Specifications
- Model
- Husqvarna TS 400 F
- Product number
- 965148111
- Motor
- 2.2 kW electric
- Power supply
- Single-phase 230–240 V
- Maximum blade diameter
- 400 mm
- Single-pass cutting depth
- 125 mm
- Step cutting depth
- Up to 230 mm
- Maximum cutting length
- 700 mm
- Bevel cutting
- Up to 45°
- Stand
- Folding legs for transport and storage
Blade & equipment conditions
Tell us what material you intend to cut so we can supply a suitable blade. Use the water-cooling system and follow the operating instructions provided at handover.
Blade wear is measured from the diamond segment height before and after hire. Measurements are recorded at handover and return.
Blade damage caused by misuse is separate from normal wear and is subject to the hire agreement.
Return the saw and water tray clean, with slurry removed. Appropriate protective equipment, suitable transport and safe loading arrangements are required.